Switch D-Link 8 Ports DGS-F1100-10PS-E
DGS-F1100-10PS-E is a managed switch designed to meet the requirements of small, medium, and enterprise businesses. DGS-F1100-10PS-E supports multiple PoE standards make it ideal for IP surveillance deployments. Advanced management features, a range of diagnostic and troubleshooting tools, and energy efficient technologies provide a flexible solution to meet your networking requirements.
Switch D-Link 8 Ports DGS-F1100-10PS-E fiche technique:
General |
|
---|---|
Model | DGS-F1100-10PS-E |
Interfaces |
|
Port Standards |
|
PoE |
|
PoE Standards | IEEE 802.3af/at |
PoE Capable Ports | Port 1-8 can support up to 250m @10Mbps with Extend Enable |
Power Budget | 96W (30W max. per port) |
Uplink Port Settings |
|
From Port | Specifies the start port in the range for Uplink Ports. These are used for connecting the surveillance VLAN with other switches. |
To Port | Specifies the end port in the range for Uplink Ports. These are used for connecting the surveillance VLAN with other switches |
Network Cables | UTP Cat. 5, Cat. 5e (100 m max.) |
Duplex Mode |
|
Performance |
|
Switching Capacity | 20 Gbps |
Transmission Method | Store-and-forward |
MAC Address Table | 8K entries |
Maximum 64 Byte Packet Forwarding Rate | 14.88 Mpps |
LED’s |
|
Power | ✓ |
System | ✓ |
Physical/Environmental |
|
Power Input | DC:12V 1A |
Operating Temperature | 0°C ~ 50°C |
Storage Temperature | -40°C to 70°C |
Operating Humidity | 10% to 95% relative humidity no condensation |
Storage Humidity | 5% to 90% relative humidity no condensation |
Dimensions (L x W x H) | 225 x 120 x 35 mm |